Home » Products » Permanent Marker Pen » Parmanent Textile Marker

Parmanent Textile Marker

Parmanent Textile Marker
Parmanent Textile Marker
Send Inquiry
Product Code : 05
Product Description

Century's Everon Marker

Century’s Everon Marker is a unique marking device used in textile mills & factories for permanent marking on gray cloth & fabrics. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. It is also known as 'pump-type marker' or 'TEXPEN’. The viscous ink makes permanent, bright & opaque markings on all kinds of fabrics and remains visible even after the dyeing & other finishing processes. It works on all kinds of fabrics like cotton, denim, polyester, wool, silk, linen etc. It is widely used in dyeing houses & textile mills in processes like dyeing, scouring, bleaching, hosiery, knitting & weaving.

Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube.

  • Permanent, Bright & Opaque Markings on any fabric. Markings are acid alkali resistant, heat resistant & remain permanent even after dyeing & finishing processes.
  • Hard Aluminium body makes it difficult to break, puncture or leak.
  • Works on all kinds of fabrics including cotton, silk, polyester, wool, denim, linen etc.
  • Rubber Valve at bottom enables smooth & automatic ink flow.
  • Zero Wastage of Ink compared to tube type markers which waste 15-20% ink.
Direction of Use:
  • Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip.
  • Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow.
  • As pressure reduces, press the rubber valve 2-3 times to continue writing.
  • Do not press the rubber bulb when not in use as it will lead to increase ink pressure.
  • Clean the tip & put the cap back on when after each use.
  • Harmful if swallowed or intentional inhalation.
  • Avoid contact with eyes. Keep away from open flame.
  • Please test before use.


Back to top
3S CORPORATION All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.